Environ Sci Pollut Res Int. 2021 Mar 5. doi: 10.1007/s11356-021-13207-y. Online ahead of print.
ABSTRACT
Adsorptive separation of heavy metals from wastewater is a viable approach to reuse it and avoid environmental pollution. The productive employment of adsorptive separation at a commercial scale, however, relies on the optimized conditions of an adsorber bed holding maximum and selective isolation of the heavy metals. The experimental route includes a significant trial and error approach, is time-consuming, involves operating cost, and remains economically unattractive. Contrarily, simulation of a mathematical model mimicking the adsorption system along with experimental validation can significantly minimize optimization efforts and suggests the best conditions of separation. In this work, a convective-dispersive model and adsorption model for fixed bed adsorption of copper (Cu), chromium (Cr), and cadmium (Cd) metals over wheat bran biosorbent are simulated using the gPROMS tool for benchmarking. The influence of feed flow rate, bed height, and metal concentration is studied, and breakthrough profiles of all heavy metals are predicted and matched with the literature. The error values (R2 and RMSE) and Chi-squared values determined from gPROMS simulations matched well with the previously available MATLAB-simulated data. After a successful benchmarking, we modeled pilot-scale adsorption of Cr on coconut coir (or Biosorbent) in a gPROMS simulation environment. A detailed method and algorithm of gPROMS simulation for Cr isolation is provided. The influence of feed flow rate, bed height, and initial metal concentration is studied on the breakthrough curves of the Cr. The optimum operating condition for the pilot-scale isolation of Cr from the water is suggested. The parameters, such as the axial dispersion coefficient and distribution coefficient, are determined.
PMID:33674977 | DOI:10.1007/s11356-021-13207-y
