Int J Prosthodont. 2022 Jul-Aug;35(4):487-493. doi: 10.11607/ijp.8010.
ABSTRACT
PURPOSE: To evaluate the effect of different cavity designs and cement types on the fracture resistance of monolithic zirconia inlay-retained fixed dental prostheses (IRFDPs).
MATERIALS AND METHODS: Four study models consisting of a second premolar, a missing first molar, and a second molar were used for the different cavity designs. Four different inlay cavity designs were prepared: DO-MO (disto-occlusal-mesio-occlusal cavity), MOD-MOD (mesio-occlusodistal-mesio-occlusodistal cavity), WDO-WMO (DO-MO with additional wings), and WMOD-WMOD (MOD-MOD with additional wings). A total of 64 epoxy resin models were produced and scanned individually. IRFDPs were then fabricated from monolithic zirconia using CAD/ CAM software. The bonding surface of the IRFDPs was airborne particle abraded (50-μm alumina/2 MPa), then cemented onto the epoxy resin models using two cementation protocols (n = 8 per group): (1) P = cemented with Panavia SA Cement Plus Automix; and (2) Z/C = cemented with MDP-containing primer (Z-Prime Plus) combined with Calibra Universal resin cement. All IRFDPs were fatigued through thermal aging (6,000 cycles/5°C to 55°C) and chewing simulations (600,000 cycles × 50-N load, 2.1 Hz). All IRFDPs were then subjected to a fracture resistance test using a universal testing machine with a crosshead speed of 0.2 mm/minute. Data were statistically analyzed using one- and two-way ANOVA and Bonferroni multiple comparisons test (P = .001).
RESULTS: The mean fracture load (N) of the designs were as follows: WMODWMOD = 1,111.1; WDO-WMO = 1,057.4; MOD-MOD = 725.6; DO-MO = 682.7. According to two-way ANOVA, the differences among the cavity designs were statistically significant (P < .05).
CONCLUSION: The cavity design of IRFDPs affected the fracture resistance. However, the fracture resistance of monolithic zirconia IRFDPs with any cavity design was enough to withstand expected posterior chewing forces.
PMID:36125873 | DOI:10.11607/ijp.8010
