J Mech Behav Biomed Mater. 2021 Aug 4;123:104757. doi: 10.1016/j.jmbbm.2021.104757. Online ahead of print.
ABSTRACT
The aim of the study was to evaluate the degree of conversion and the mechanical properties of five composite core build-up materials polymerized in dual-curing and self-curing modes. The materials tested were: Clearfil DC Core Plus (CF), Gradia Core (GC), Luxacore-Z Dual Smartmix (LX), Multicore Flow (MC) and Paracore (PC). Disk-shaped specimens were prepared from each material; half the specimens were light-cured, whereas the rest were only self-cured. After a 3-week storage period (dark/dry/37 °C) the Martens Hardness, Indentation Modulus, and Elastic Index were determined by instrumented indentation testing (IIT), while the degree of conversion was assessed by ATR-FTIR spectroscopy. Statistical analysis was performed by 2-way ANOVA and post-hoc testing (α = 0.05). The dual-curing mode resulted in statistically higher Martens Hardness and Elastic Index than the self-curing mode in most materials but showed insignificant differences in Indentation Modulus. MC and PC demonstrated significantly higher degree of conversion in both curing modes. Overall, the self-curing mode was inferior to the dual-curing in conversion and mechanical properties for most products, despite their differences in monomer composition and filler loading.
PMID:34375795 | DOI:10.1016/j.jmbbm.2021.104757
