Tag: pubmed

SAGE Open Med. 2024 Mar 20;12:20503121241238148. doi: 10.1177/20503121241238148. eCollection 2024.

ABSTRACT

OBJECTIVES: To determine the optimal initial insulin dosage for controlling hyperglycemia in COVID-19 patients receiving steroids, an area with limited data.

METHODS: We retrospectively analyzed 156 COVID-19 patients with steroid-induced hyperglycemia treated with insulin. Patients were categorized by their total daily dose of subcutaneous insulin therapy when starting dexamethasone ⩾6 mg/day or equivalent dose of glucocorticoid: Group A (⩽0.29 units/kg), Group B (0.3-0.49 units/kg), Group C (0.5-0.69 units/kg), and Group B (⩾0.7 units/kg). Treatment failure was defined as mean blood glucose level > 280 mg/dL for two consecutive days after initiating insulin or any blood glucose ⩾ 400 mg/dL.

RESULTS: The mean age was 64 ± 14 years, with 50% male, and a mean body mass index of 26.9 ± 6.9 kg/m². Most had preexisting type 2 diabetes (62%). Mean admission blood glucose and HbA1c were 233 ± 112 mg/dL and 7.8 ± 2.3%, respectively. Group A had the lowest HbA1c (6.7 ± 1.2%), while group D had the highest (9.8 ± 2.5%). Median daily dexamethasone dosage or equivalent was 36 (IQR 16.72) mg, with no significant differences in among groups. Group A had the lowest treatment failure rate. There were no significant differences in treatment failure rate between Groups B, C, and D. Additionally, there were no statistically significant differences in mean BG across the groups: Group A 232 ± 42 mg/dL, Group B 247 ± 57 mg/dL, Group C 247 ± 61 mg/dL, and Group D 227 ± 67 mg/dL (p = 0.2). Group D had a significantly higher rate of level 1 hypoglycemia (p = 0.008), while no differences in clinically significant hypoglycemia (level 2 or 3) were observed between groups.

CONCLUSIONS: Among patients requiring TDD ⩾ 0.3 units/kg/day, there was no significant difference in treatment failure rate between Groups B, C, and D. Group D had the highest rate of level 1 hypoglycemia. This initial insulin dosage for hospitalized COVID-19 patients on high-dose steroid therapy should be personalized.

PMID:38516643 | PMC:PMC10956164 | DOI:10.1177/20503121241238148

SAGE Open Med. 2024 Mar 21;12:20503121241237115. doi: 10.1177/20503121241237115. eCollection 2024.

ABSTRACT

INTRODUCTION: Immunization helps reduce morbidity and mortality attributable to severe vaccine-preventable childhood illnesses. However, vaccination coverage and the quality of immunization data remain challenging in Ethiopia. This has led to poor planning, suboptimal vaccination coverage, and the resurgence of vaccine-preventable disease outbreaks in under-immunized pocket areas. The problem is further compounded by the occurrence of the COVID-19 pandemic and the disruption of the health information system due to recurrent conflict. This study assessed the current status of the immunization service and its challenges in Ethiopia.

METHODS: A mixed-methods study was conducted in three regions of Ethiopia from 21 to 31 May, 2023. A survey of administrative reports was done in a total of 69 health facilities in 14 woredas (districts). Nine KIIs were conducted at a district level among immunization coordinators selected from three regions to explore the challenges of the immunization program. Linear regression and descriptive statistics were used to analyze the quantitative data. Thematic analysis was applied to analyze the qualitative data. The findings from the qualitative data were triangulated to supplement the quantitative results.

RESULT: Two-thirds (66.4%) of the children were fully vaccinated, having received all vaccines, including the first dose of the MCV1, by 12 months of age, as reported through administrative reports collected from health facility records. Catchment area population size and region were significantly associated with the number of fully immunized children (p < 0.001 and p = 0.005, respectively). The vaccination dropout rates of the first to third dose of pentavalent vaccine and the first dose of pentavalent vaccine to the first dose of MCV1 were 8.6% and 7.4%, respectively. A considerable proportion of health facilities lack accurate data to calculate vaccination coverage, while most of them lack accurate data for dropout rates. Longer waiting time, interruptions in vaccine supply or shortage, inaccessibility of health facilities, internal conflict and displacement, power interruption and refrigerator breakdown, poor counseling practice, and caretakers’ lack of awareness, fear of side effects, and forgetfulness were the reasons for the dropout rate and low coverage. The result also showed that internal conflict and displacement have significantly affected immunization coverage, with the worst effects seen on the most marginalized populations.

CONCLUSION: The study revealed low vaccination coverage, a high dropout rate, and poor quality of immunization data. Access and vaccination coverage among marginalized community groups (e.g., orphans and street children) were also low. Hence, interventions to address organizational, behavioral, technical, and contextual (conflict and the resulting internal displacement) bottlenecks affecting the immunization program should be addressed.

PMID:38516641 | PMC:PMC10956145 | DOI:10.1177/20503121241237115

Optim Lett. 2023 Jun;17(5):1133-1159. doi: 10.1007/s11590-022-01919-0. Epub 2022 Sep 4.

ABSTRACT

The task of projecting onto ${\ell }_p$ norm balls is ubiquitous in statistics and machine learning, yet the availability of actionable algorithms for doing so is largely limited to the special cases of $p\in \text{{}0\text{,}1\text{,}2\text{,}\infty \text{}}$. In this paper, we introduce novel, scalable methods for projecting onto the ${\ell }_p$-ball for general $p>0$. For $p\ge 1$, we solve the univariate Lagrangian dual via a dual Newton method. We then carefully design a bisection approach For $p<1$, presenting theoretical and empirical evidence of zero or a small duality gap in the non-convex case. The success of our contributions is thoroughly assessed empirically, and applied to large-scale regularized multi-task learning and compressed sensing. The code implementing our methods is publicly available on Github.

PMID:38516636 | PMC:PMC10956251 | DOI:10.1007/s11590-022-01919-0

Biol Imaging. 2023 Dec 14;4:e1. doi: 10.1017/S2633903X23000260. eCollection 2024.

ABSTRACT

Image analysis techniques provide objective and reproducible statistics for interpreting microscopy data. At higher dimensions, three-dimensional (3D) volumetric and spatiotemporal data highlight additional properties and behaviors beyond the static 2D focal plane. However, increased dimensionality carries increased complexity, and existing techniques for general segmentation of 3D data are either primitive, or highly specialized to specific biological structures. Borrowing from the principles of 2D topological data analysis (TDA), we formulate a 3D segmentation algorithm that implements persistent homology to identify variations in image intensity. From this, we derive two separate variants applicable to spatial and spatiotemporal data, respectively. We demonstrate that this analysis yields both sensitive and specific results on simulated data and can distinguish prominent biological structures in fluorescence microscopy images, regardless of their shape. Furthermore, we highlight the efficacy of temporal TDA in tracking cell lineage and the frequency of cell and organelle replication.

PMID:38516632 | PMC:PMC10951800 | DOI:10.1017/S2633903X23000260

Biol Imaging. 2024 Feb 15;4:e2. doi: 10.1017/S2633903X24000011. eCollection 2024.

ABSTRACT

Imaging platforms for generating highly multiplexed histological images are being continually developed and improved. Significant improvements have also been made in the accuracy of methods for automated cell segmentation and classification. However, less attention has focused on the quantification and analysis of the resulting point clouds, which describe the spatial coordinates of individual cells. We focus here on a particular spatial statistical method, the cross-pair correlation function (cross-PCF), which can identify positive and negative spatial correlation between cells across a range of length scales. However, limitations of the cross-PCF hinder its widespread application to multiplexed histology. For example, it can only consider relations between pairs of cells, and cells must be classified using discrete categorical labels (rather than labeling continuous labels such as stain intensity). In this paper, we present three extensions to the cross-PCF which address these limitations and permit more detailed analysis of multiplex images: topographical correlation maps can visualize local clustering and exclusion between cells; neighbourhood correlation functions can identify colocalization of two or more cell types; and weighted-PCFs describe spatial correlation between points with continuous (rather than discrete) labels. We apply the extended PCFs to synthetic and biological datasets in order to demonstrate the insight that they can generate.

PMID:38516631 | PMC:PMC10951806 | DOI:10.1017/S2633903X24000011

J Contemp Dent Pract. 2024 Jan 1;25(1):79-84. doi: 10.5005/jp-journals-10024-3621.

ABSTRACT

AIM: This study aimed to investigate the effect of modified framework (MF) design on the fracture resistance of IPS e.max Press anterior single crown after thermocycling and cyclic loading.

MATERIALS AND METHODS: Two types of IPS e.max Press frameworks were designed (n = 10); standard framework (SF) with a 0.5 mm uniform thickness and MF with a lingual margin of 1 mm in thickness and 2 mm in height connected to a proximal strut of 4 mm height and a 0.3 mm wide facial collar. The crowns were cemented to resin dies, subjected to 5,000 cycles of thermocycling, and loaded 10,000 cycles at 100 N. A universal testing machine was used to load specimens to fracture, and the modes of failure were determined.

RESULTS: The mean and standard deviation (SD) of fracture resistance were 219.24 ± 110.00 N and 216.54 ±120.02 N in the SF and MF groups. Thus, there was no significant difference (p = 0.96). Mixed fracture was the most common failure mode in both groups. We found no statistically significant difference between the groups (p = 0.58).

CONCLUSION: The MF design did not increase the fracture resistance of IPS e.max Press crown.

CLINICAL SIGNIFICANCE: Framework design is an essential factor for the success of all-ceramic restorations and its modification might be regarded as an approach to increase fracture resistance. Furthermore, the modified design was evaluated in metal-ceramic or zirconia crowns while less attention was paid to the IPS e.max Press crowns. How to cite this article: Golrezaei M, Mahgoli HA, Yaghoobi N, et al. The Effect of Modified Framework Design on the Fracture Resistance of IPS e.max Press Crown after Thermocycling and Cyclic Loading. J Contemp Dent Pract 2024;25(1):79-84.

PMID:38514436 | DOI:10.5005/jp-journals-10024-3621

J Contemp Dent Pract. 2024 Jan 1;25(1):72-78. doi: 10.5005/jp-journals-10024-3629.

ABSTRACT

AIM: In comparing the effectiveness and efficiency of different types of post removal systems in removing different types of fiber posts (FPs), this study aims to shed light on the success of removal by currently available drill systems.

MATERIALS AND METHODS: A total of 200 maxillary first molars, were root canal treated and prepared to receive posts. The molars were divided into four groups corresponding to four different FPs: Group RX, Radix FP; Group RF, Reforpost Glass Fiber; Group HI; Hi-Rem Endodontic Post; and Group DT, D.T. Light-Post Illusion X-RO. Fiber posts were done with luting by Gradia Core (GC America, Inc.). Groups were again divided into five subgroups corresponding to the technique by which the FP was removed into as follows: Subgroup P, PD-25-1.1 Drill; subgroup G, GC FP Drill; subgroup E, EasyPost Precision Drill; subgroup R, Reaccess Carbide Double Taper Kit; and subgroup H; H-Endodontic Drill. After posts were removed, effectiveness and efficiency were documented. Data were tabulated and statistically analyzed.

RESULTS: Strong significant differences regarding efficiency among groups (FP type) and subgroups (drills used) (p = 0.00) were shown by the one-way analysis of variance (ANOVA) test. Subgroup DT-G scored the longest mean removal time (20.9 minutes) while Subgroup RX-R scored the shortest mean removal time (1.4 minutes) Regarding effectiveness, strong significant differences among groups (p = 0.00) and subgroups (p = 0.00) were shown by one-way ANOVA. Subgroup RF-G scored the highest scale (5.2) whereas subgroup HI-R scored the lowest mean scale (1.2).

CONCLUSION: The difference was strongly significant between tested post-removal kits and between tested FPs. Re-access Carbide Double Taper Kit performed superiorly in both effectiveness and efficiency, followed by PD-25-1.1 Drill. Hi-Rem post showed the best retrieving results among other FPs.

CLINICAL SIGNIFICANCE: Knowing the best technique and tools for post removal could spare the practitioner any unwanted complications during post removal. How to cite this article: Sayed M, Alahmad AM, Alhajji KS, et al. Removal Efficiency and Effectiveness of Four Different Fiber Posts Using Five Different Drill Systems in Multirooted Teeth. J Contemp Dent Pract 2024;25(1):72-78.

PMID:38514435 | DOI:10.5005/jp-journals-10024-3629

J Contemp Dent Pract. 2024 Jan 1;25(1):62-67. doi: 10.5005/jp-journals-10024-3622.

ABSTRACT

AIMS: This study aimed to assess the awareness of the risk of medication-related osteonecrosis of the jaw (MRONJ) among general dental practitioners (GDPs) and primary care physicians (PCPs), focusing on the clinical implications and coordination of treating or identifying high-risk patients.

MATERIALS AND METHODS: Two Google Forms electronic questionnaires were distributed to 724 GDPs and 617 PCPs in primary care settings. One for PCPs with eight multiple choice questions and the other for GDPs with 10 multiple choice questions. A clinical case scenario and a section on open-ended comments were included in both questionnaires. The data obtained from each group were statistically analyzed and compared.

RESULTS: A total of 239 GDPs and 220 PCPs participated in the study, with a response rate of 34.23%. The mean age of participants was 29.5 years and 54.35% were females (51.2% and 57.5% in the GDPs and PCPs group, respectively). Most participants had graduated from Saudi Arabia. Almost all dentists were aware of osteonecrosis of the jaw (95.1%), 68.3% of them were aware of the guidelines regarding bisphosphonate-related osteonecrosis of the jaw (BRONJ) and MRONJ, 60.5% rated their general knowledge about MRONJ as very poor to poor, and 91.8% did not know any guidelines regarding BRONJ or MRONJ. Among the participants, 75.3% did not know how MRONJ was present in the oral cavity. A total of 69.9% of participants were unaware of other factors associated with an increased risk of MRONJ.

CONCLUSION: MRONJ risk awareness varies greatly between dentists who diagnose and manage patients in dental clinics and physicians who write about medicines and therapies. Counseling sessions and greater coordination between dental and medical specialists are strongly suggested while prescribing antiresorptive drugs to prevent the consequent development of MRONJ.

CLINICAL SIGNIFICANCE: This study shows a significant lack of knowledge regarding MRONJ among GDPs and PCPs, which may affect the prevention and treatment of patients. Therefore, we urge GDPS and PCPs to take more information from scientific sources on this topic and more cooperation from specialties for the benefit of patients. How to cite this article: Aljohani MH, Aljohani AS, Aljohani RM, et al. Medical and Dental Professions’ Varying Levels of Awareness Regarding Medication-related Osteonecrosis of the Jaw in Saudi Arabia? A Cross-sectional Study. J Contemp Dent Pract 2024;25(1):62-67.

PMID:38514433 | DOI:10.5005/jp-journals-10024-3622

J Contemp Dent Pract. 2024 Jan 1;25(1):58-61. doi: 10.5005/jp-journals-10024-3595.

ABSTRACT

AIM: The aim of the current investigation was to evaluate the marginal microleakage of various esthetic restorative materials applied to primary teeth.

MATERIALS AND METHODS: A total of 75 noncarious primary molars that were removed for orthodontic intervention and teeth nearing exfoliation were chosen. One millimeter (mm) above the cementoenamel junction, on the buccal surface of the teeth, Class V cavities were prepared. William’s graded periodontal probe was used to standardize cavity preparation on all teeth. 3 mm was the cavity’s length, 2 mm in width, and 2 mm in depth. The teeth were then divided into three groups (25 samples in each group) according to the type of esthetic restorative material used. Group I: Resin-modified glass ionomer cement, Group II: Ormocer, Group III: Giomer. The samples underwent 500 cycles of thermocycling, with an immersion time of 60 seconds and a well time of 15 seconds, between 5 and 55°C. The samples were submerged in methylene blue dye for 24 hours at room temperature and dried. The samples were then divided into sections and examined with a stereomicroscope. Data was recorded and statistically analyzed.

RESULTS: The least marginal microleakage was found in the ormocer group (1.22 ± 0.01) followed by resin-modified glass ionomer cement group (1.31 ± 0.07) and the giomer group (1.78 ± 0.03). There was a highly statistically significant difference found between resin-modified glass ionomer cement group and the ormocer group, resin-modified glass ionomer cement group and giomer group. And no significant difference was found between the ormocer group and the giomer group.

CONCLUSION: The present study concluded that there was some amount of microleakage in primary teeth in all restorative materials examined in this in-vitro investigation. However, the marginal sealing ability of ormocer was found highest compared to resin-modified glass ionomer cement and Giomer materials.

CLINICAL SIGNIFICANCE: The primary reason dental restorations fail, particularly in Class V cavities, is microleakage since the margins of these restorations are typically found in the dentin or cementum. Assessing microleakage is a crucial step in determining the marginal integrity of restorative materials. Developing methods and resources that reduce the adverse effects caused by the restorative marginal seal failing would benefit from this. How to cite this article: Al Ghwainem A, Alqarni AS. Comparative Assessment of Marginal Micro Leakage of Different Esthetic Restorative Materials Used on Primary Teeth: An In-vitro Study. J Contemp Dent Pract 2024;25(1):58-61.

PMID:38514432 | DOI:10.5005/jp-journals-10024-3595

J Contemp Dent Pract. 2024 Jan 1;25(1):52-57. doi: 10.5005/jp-journals-10024-3623.

ABSTRACT

AIM: The aim of this study was to assess the impact of Nd:YAG laser, glutaraldehyde-based desensitizer (GD), or their combination on occluding dentinal tubules.

MATERIALS AND METHODS: Fifty dentin samples were obtained from non-carious human third molars and randomly divided into five groups (n = 10): (1) Control group treated with 37% phosphoric acid, (2) GD group, (3) Nd:YAG laser group (1064 nm, 100 µs, 10 Hz, 300 µm fiber, 1 W power, 100 mJ energy, and 85 J/cm² energy density), (4) GD followed by Nd:YAG laser group, and (5) Nd:YAG laser followed by GD group. Scanning electron microscopy (SEM) was used to capture five images from each sample for analysis of dentinal tubules using Image J software. SEM/EDX elemental analysis was performed to determine the main mineral contents. Data analyzed using one-way ANOVA and Tukey’s post hoc test for statistical comparisons.

RESULTS: Laser and combination groups showed a significant decrease in dentinal tubule counts compared with the control and GD groups (p < 0.0001). There were no significant differences in open dentinal tubule counts between the control and GD groups, as well as between the laser and combination groups. However, significant differences were observed in the total area, average size of the tubules, and percentage area between the control group and the treatment groups (GD, laser, GD + laser, laser + GD). No significant difference was found in the Ca/P ratio between the tested groups.

CONCLUSION: The use of Nd:YAG laser alone or in combination with GD was more effective in occluding dentinal tubules compared to GD alone.

CLINICAL SIGNIFICANCE: This study has shown that Nd:YAG laser alone and in combination with GD has superior dentinal tubule occlusion in vitro. Its clinical use in the treatment of dentinal hypersensitivity may overcome the drawback of conventional treatment approaches for dentin hypersensitivity needing repeated applications to achieve continuous relief from pain since acidic diet and toothbrushing result in the continuing elimination of precipitates and surface coatings. How to cite this article: Alzarooni AH, El-Damanhoury HM, Aravind SS, et al. Combined Effects of Glutaraldehyde-based Desensitizer and Nd: YAG Laser on Dentinal Tubules Occlusion. J Contemp Dent Pract 2024;25(1):52-57.

PMID:38514431 | DOI:10.5005/jp-journals-10024-3623